Can you set up any RIGOL scopes to stop triggering after a specific averaging number?
The average acquisition mode for the DS1000E/D, DS1000CA, DS1000B, DS4000, and DS6000 scopes are identical in function. They collect a boxcar average of the last n (usually a power of 2) acquisitions on a rolling basis.
On the DS1000Z, DS2000/A, DS4000, and DS6000 scopes users can enable record mode to capture a specific amount of triggers into a set of frames, but to average all that data together it would have to be done externally.
To find the expanded Hardware Revision of the DS1000B series, follow these easy steps:
1. Press Utility
2. Press the Down Arrow to reach Menu 3/3
3. Press System Info
4. Press CH1 twice > CH2 twice > MATH once
5. You should now see the information
Why does my DS1000E seem to miss the first trigger points on slow time scales?
When the horizontal time base is set to 50ms or slower ,the scope will go into the slow scan mode. In this mode, the scope acquires sufficient data for the left side of the trigger point, then wait for trigger, when trigger occurs, it continues to draw the rest of the wave from the trigger point to the end of the right side. So when we measure low frequency signals, we usually choose slow scan mode to check the whole signal.
In slow scan mode there will be less delay between the trigger and the display if the trigger is all the way to the right. Then all of your data will be pre-trigger.
This VI allows you to select the channel for data transfer and save off data as a CSV file format. Written in LabVIEW 2011.
Download the VI for LabVIEW in a zip package here.
The DS2000 Oscilloscope comes with 2000+ minutes of trial options.
This allows customers that are new to the product to try the features and see if they are helpful for their test needs.
Here is a list of the trial options:
Trigger options (Part Number AT-DS2):
Decode (Part Number SD-DS2):
Memory Depth (Part Number MEM-DS2):
To check the remaining time available Press Utility > Down Arrow > Options > Installed
For pricing, go to: http://www.rigolna.com/products/digital-oscilloscopes/ds2000/
Select the ACCESSORIES tab.
Связаться с нами
Телефон: +7 991 486 17 96